Asko 491289 Installationshandbuch

Installation Instructions Outdoor dishwasherINTRODUCTION ...

10 11If the cord is not long enough, or if a hard-wire installation is needed, follow the steps below to complete the electrical connection.WARNING!Be

NOTES10 11CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM492183_492185 Install DW Outdoor US

12INSTALLATION CHECKLISTASKO - DISHWASHERAppliance Installation Checklist• Remove packaging and check for cosmetic damages.• Remove the information pa

2 3TOOLS1) Phillips No. 2 screwdriver 2) Flat blade screwdriver3) Torx screwdriver size T 204) Adjustable wrenches (if you use copper fittings)5)

2 3• It is important that you closely follow the instructions provided here.• An incorrect or defective installation can lead to higher consumption

4 5OPERATING ENVIRONMENTDo not place this appliance (including the PEX fill hose and drain hose) where it will be hit by direct sunlight or exposed to

4 5WARNING!Plumbing connections must comply with applicable sanitary, safety and plumbing codes in your area. The machine can be connected to either a

6 7ASKO provides a 7/8˝ (22 mm) diameter corrugated drain hose which is connected to the back of the unit to form a high loop.NOTE:Do not use any fitt

6 7WARNING!Before working on wiring for any electrical appliance, be sure the electrical power has been turned off at the breaker/fuse box.WARNING!Dis

8 9At this point the styrofoam, plastic wrap, and the wood pallet (base) should be removed from the dishwasher. Now is an excellent time to inspect fo

8 9MOVING THE MACHINE INTO PLACEWARNING!Make sure you put the protective slides on the legs to prevent damaging the floor when you slide the unit into