Asko T761 Bedienungsanleitung PDF herunterladen (Seite 20)

Page 20

The Delayed Start Program

This program lets you delay starting the dryer for up to

24 hours. This feature is useful in areas where utility

companies offer discount rates during off-peak hours.

When you select Delayed Start on the program menu,

you must select a delay time (1 to 24 hours).

1. Press MENU until “Select time for delayed start”

displays.

2. In the bottom right corner of the LCD window, a

clockface and a zero will flash. To change the zero,

simply press an Arrow button until the LCD displays

the number of hours you want to delay starting the

program (1–24 hours).

3. If you only want to use this setting temporarily (for

this one load), press START. When the program

ends it will revert back to the previous setting.

4. If you want to save this setting permanently, press

ENTER again then press START. The program will

retain the change.

When you press START, the clockface and the hours

you set for the delay will display, as illustrated below:

Selecting Options

This lets you select Buzzer, Anti-crease, and Normal or

Quick Cooling. Only the options available with the

program you selected will display. (See tables on page

14.)

1. Press MENU until “Select Options” displays.

2. Continue to press MENU to scroll through the options.

3. Press an Arrow button to toggle between Off and On

4. If you only want to use this setting temporarily (for

this one load), press START. When the program

ends it will revert back to the previous setting.

5. If you want to save this setting permanently, press

ENTER again then press START. The program will

retain the change.

RESTORING A PRESET

PROGRAM

To restore a preset program to its factory default settings,

simply press the button (P1P4) for the preset program

you want to restore and hold it down while your press

ENTER. The program will revert to its factory default

settings.

Timed Dry and Air Fluff

When you select Timed Dry or Air Fluff on the program

menu, the word “Time” and a number (of minutes) will

flash in the upper right corner of the LCD window. This

indicates you must select a program time (5 to 90 minutes

in 5-minute increments).

1. Press MENU until “Select time” displays.

2. To change the number, simply press an Arrow button

until the length of time you want the program to run

displays.

3. If you only want to use this setting temporarily (for

this one load), press START. When the program

ends it will revert back to the previous setting.

4. If you want to save this setting permanently, press

ENTER again then press START. The program will

retain the change.

When you press START, the time remaining for the

program to run displays in the bottom right-hand corner

of the LCD window, as illustrated below:

The remaining time toggles between the minutes

remaining (e.g., 23) and the hour(s) remaining (e.g., 1h).

The Temperature Menu

This menu lets you select a Normal or Low temperature.

Only the temperatures available for the dry program you

selected will display.

1. Press MENU until “Select temperature” displays.

2. Use the Arrow buttons to toggle between the Normal

and Low temperature settings.

3. If you only want to use this setting temporarily (for

this one load), press START. When the program

ends it will revert back to the previous setting.

4. If you want to save this setting permanently, press

ENTER again then press START. The program will

retain the change.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Asko T761 Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Trockner Asko T761