Asko T761 Bedienungsanleitung PDF herunterladen (Seite 21)

Page 21

ENGLISH

T761 AND T781 ERROR MESSAGES

Error messages will display in the LCD window if a fault

occurs while a program is in progress. The table below

defines each possible error message. If the message

still displays after you have checked the possible

solutions, call a service technician.

ERROR MESSAGE SOLUTION

Maximum program time

Overflow (T781)

Sensor

Thermistor

Make sure both fuses are intact.

Clean the lint filter.

Make sure exhaust hose is clear (T761).

Clear message by turning the power off then on.

Make sure the condensed water container is empty. If draining into a drain pipe,

make sure the black rubber hose is not kinked or blocked. The drain should not be

higher than 40 inches from the floor.

Make sure the condensation pump is not blocked.

This can appear if there are dry clothes in the drum when the unit is started. Cancel

the error message by opening the door or turning the power off then on.

Call a service technician.

♦ English

♦ French

♦ Spanish

♦ Portuguese

♦ Italian

♦ German

♦ Swedish

♦ Danish

♦ Norwegian

♦ Netherlands

♦ Finnish

CHANGING THE LANGUAGE ON

THE LCD DISPLAY

There are eleven languages available for the LCD

window:

To change the language, follow the steps below:

1. Turn the machine off then on again.

2. Press ENTER five times in succession then press

P1 five times. (This must be done within 15 seconds.)

3. When the Language menu displays, press an Arrow

button to advance through the menu to the desired

language.

4. Once the correct language displays, press ENTER

to program the LCD window to display the language

you selected.

CHILD-SAFE START

As a safety measure, you can program the T761 and

T781 not to start unless the Start button is held down

for three seconds. To do this, follow the steps below:

1. Turn the machine off then on.

2. Press ENTER five times, then press P3 five times.

(This must be done within 15 seconds.)

3. “Delayed start” displays with “0” flashing in the lower

right corner. Press the Right Arrow button to toggle

the display to “3.”

CHILD-SAFE MENU BUTTON

Please note that when you set the child-safe Start button,

the Menu button is automatically programmed to delay

for three seconds before it becomes active. This prevents

a child from accidentally changing the program settings.

When you want to change a program, press the Menu

button for three seconds to activate the menus. The

Menu button will work normally (without the 3-second

delay) until you have completed your changes. If it is

not pressed for two minutes, it will automatically revert

back to the child-safe mode.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Asko T761 Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Trockner Asko T761